Tyco Electronics Surge Protector E610216 User Manual

InstallingtheMagneticStripReaderforthe  
B-SeriesTouchcomputer  
Caution:  
The touch computer must be unplugged before any installation occurs.  
Included Items:  
One Elo Magnetic Strip Reader  
Revision A  
P/N E610216  
Two mounting screws  
 
5
6
1
Press a small screwdriver into the  
cover between the two notches.  
As the cover bends up, grasp the  
end and peel it away.  
Turn off the touch computer.  
2
3
Plug the cable into  
the connector on the  
touchcomputer.  
Choose a location to attach the  
magnetic stripe reader.  
7
Remove the two accessory  
covers over the chosen  
mounting location.  
Insert the hooks on the device  
into the corresponding slots on  
the touch computer.  
8
4
Secure the device to the touch-  
computer using the included  
screws.  
To remove each cover, locate  
the two small notches on the  
cover.  
 

Taylor Freezer TW 357 User Manual
Toastmaster Car Stereo System BTW09 User Manual
Toastmaster Mixer RHHM16 User Manual
Toastmaster Rice Cooker TRC3 User Manual
Toshiba Computer Drive SD R1512 User Manual
Toshiba CRT Television WLT66 User Manual
Tripp Lite Network Cables N201 014 WH User Manual
Vox Musical Instrument Amplifier VT120+ User Manual
Wagner SprayTech Heat Gun HT3500 User Manual
Wayne Septic System 330102 001 User Manual