Uniden Two Way Radio GMR1058 2CK4CK User Manual

Congratulations on your purchase of the Uniden  
GMR1058-2CK(4CK) (General Mobile Radio  
Service) radios. These products are lightweight,  
palm-sized radios. Use them at sporting events to  
stay in contact with family and friends, hiking,  
skiing, outdoors, or in a neighborhood watch for  
vital communication. These compact, state-of-the-  
art devices are equipped with many features.  
compartment. Be certain to follow the instruction  
written on the label on the battery pack.  
Installing the battery pack incorrectly will prevent  
the unit from operating.  
1) Enter the Menu. The CTCSS code on the LCD  
display will appear.  
To select a call tone:  
2) Press and hold the sel/ key again to turn the  
unit OFF.  
GMR1058-2CK(4CK)  
1) Enter the Menu. Advance through the Menu until  
the call icon is shown on the display. The  
current call tone number (1-5) will be indicated.  
2) Press the L or M key to increase or decrease  
the number to the desired call tone. Each tone  
will be heard through the speaker.  
2) Press the L or M key to increase or decrease  
the code number displayed. You can also select  
oF (OFF) at this stage.  
• Power Boost Button for  
Maximum Range  
Battery Level Meter  
Channel Monitor  
Channel Scan  
Keypad Lock  
Adjusting the Sound (Key Beeps)  
4) Replace the battery compartment door.  
Your radio emits a beep each time one of the buttons  
or keys (except for the PTT and Power boost button,  
and call key) are pressed. To turn this sound OFF,  
press and hold call key while turning ON the radio.  
Repeat this step to turn the sound ON.  
• 15 GMRS / 7 FRS Channels  
• Up to 10 Mile Range*  
• 5 Selectable Call Tone Alerts  
• Backlit LCD Display  
• Roger Beep  
3) Exit the Menu.  
Belt Clip  
NiMH Battery Pack and  
Charger  
Talking on Your Radio  
3) Exit the Menu.  
BATTERY LEVEL AND  
LOW BATTERY ALERT  
To talk to others using the radio:  
Navigating through the Menu  
To access the advanced features of the GMR1058-  
2CK(4CK), your radio has a Menu function.  
• Key Beep on/off  
• 38 CTCSS Code  
To transmit the selected call tone, press the call  
key. The selected tone will automatically be  
transmitted for a fixed length of time.  
1) Press and hold the PTT button and speak in a  
clear, normal voice about 2-3 inches away from  
the microphone. While you are transmitting, the  
icon will appear on the display. To avoid  
PACKAGE CONTENTS  
This unit has a battery level meter on the display to  
indicate the status of the batteries. When the  
batteries in the unit are very low, the battery level  
• Optional Headset Accessory  
• Headset Jack  
Your package contains two(four) radios, this  
reference guide including the product registration  
card, two(four) Belt Clips, two(four) rechargeable  
NiMH battery packs(#BP38), two(four) AC adapters  
(#AD-0001), and two(four) recharging  
cradles(#RC6488). To order headsets, replacement  
batteries, or other accessories, visit our website at  
8 a.m. to 5 p.m. CST. Use only Uniden accessories.  
meter icon  
will flash. Replace the alkaline  
Keypad Lock  
Normal  
CTCSS  
VOX Level  
Call Tone  
1-5  
Key Lock  
OFF-ON  
Normal  
cutting off the first part of your transmission,  
pause slightly after pressing the PTT button  
before you start talking.  
batteries immediately or if you are using the NiMH  
battery pack, you must recharge the battery in  
order to continue using the radio.  
To Lock the keypad:  
1) Enter the Menu. Advance through the Menu until  
OFF, 1-38 OFF, 1-3  
2) When you are finished speaking, release the PTT  
button.You can now receive incoming calls. While  
the  
icon appears on the display. The current  
Warning! To avoid the risk of personal injury or  
property damage from fire or electrical shock, only  
use the Uniden accessories specifically designated  
for this product.  
key Lock status oF (OFF) blinks on the display.  
2) To switch the key Lock mode from OFF to ON,  
press the L key.  
receiving, the  
Note: When you press the Power boost button,  
boost and icon appear on the display. The  
icon will appear on the display.  
1) To enter the Menu, press the sel/ key.  
2) Additional presses of the sel/ key will  
NiMH Battery Pack - #BP38  
Charging Cradle - #RC6488  
AC Adapter - #AD-0001  
Headset - #HS2467  
3) To confirm the setting, press the sel/ key. The  
radio returns to the "Normal" mode.  
advance you through the Menu until exiting to  
"Normal" operating mode.  
radio will transmit Maximum power when a GMRS  
channel is selected. After one minute past when  
the boost transmission is established, the  
transmission stops automatically, and you will hear  
a boost time out error tone.  
* Range may vary depending on environmental and/or topographical conditions.  
3) Other methods of exiting the Menu function are:  
a. Press and hold the sel/ key again.  
b. Press buttons or keys (except L and M keys).  
c. Wait 10 seconds until the unit automatically  
returns to Normalmode.  
Note: If you exit the setting mode by pressing  
other than the sel/ key, the key Lock setting will  
be set to OFF.  
USING THE CHARGING CRADLE  
GMR1058 RADIO  
If you use the rechargeable NiMH battery pack,  
two(four) GMR1058 radios can be charged by using  
the charging cradles.  
GMRS LICENSE  
To Unlock the keypad:  
Voice Operated Transmission  
Make sure to turn the radio OFF before placing  
the radio in the charging cradle. Otherwise the  
battery level meter icon won’t indicate properly.  
The GMR1058-2CK(4CK) radio operates on the  
General Mobile Radio Service (GMRS)  
1) Press and hold the sel/ key to turn the unit  
OFF.  
Your GMR1058-2CK(4CK) radio is equipped with a  
user selectable Voice Operated Transmitter (VOX)  
that can be used for automatic voice transmissions.  
The VOX feature is designed to be used with a  
headset with a microphone. Transmission is  
initiated by speaking into the remote microphone  
instead of pushing the PTT button.  
Choosing a Channel  
14  
15  
21  
22  
23  
frequencies which require a Federal  
2) Press and hold the sel/ key again to turn the  
unit ON. The keypad is unlocked.  
1
2
16  
Your radio has 22 channels and 38 CTCSS codes  
you can use to talk to others. In order to speak to  
someone, each of you must set to the same  
channel and CTCSS code.  
Communication Commission license to operate.  
For licensing information and application forms,  
call the FCC hotline at 1-800-418-3676. If you  
have any questions you can contact the FCC  
direct at 1-888-225-5322.  
17  
18  
19  
1) Connect the AC adapter (# AD-0001) to DC IN  
9V jack and to a standard 120V AC wall outlet.  
2) Set the charging cradle on the desk or tabletop,  
and place the radio in the charging cradles with  
the keypad facing forward.  
8
Channel Scan Feature  
24  
25  
9
Your GMR1058-2CK(4CK) radio has a channel  
Scan feature that allows you to easily Scan all 22  
channels. When an active channel is detected, the  
unit will pause on that channel until the channel is  
clear. Then after a 2 second delay, the unit will  
continue scanning. Pressing the PTT or Power  
boost button while the Scan is paused on a  
channel will allow you to transmit on that channel.  
To choose a channel:  
20  
10  
11  
3
4
5
With the radio in "Normal" mode press the ch key  
and press the L or M key to increase or decrease  
the channel number displayed.  
To select the VOX level:  
3) Make sure that the LED illuminates. Charge the  
battery pack for 16 hours and remove the radio  
from the charging cradle after charge.  
No license is required for operation on channels  
8-14 or operation on any channel in Canada.  
26  
12  
13  
1) Enter the Menu. Advance through the Menu until  
the vox icon appears on the display. The current  
level (OFF, 1-3) will be indicated. Level oF (OFF)  
disables VOX, while levels (1-3) set the  
sensitivity of the VOX circuit.  
6
7
Note: FRS Channels 8-14 have an expectancy  
range of up to 3 miles. GMRS channels 1-7, 15-22  
have an expectancy range of up to 10 miles by  
pressing the Power boost button.You can know  
which GMRS or FRS channel is active by the icon.  
The icon indicates GMRS channel, and the  
icon indicates FRS channel.  
27  
Note: The charge indicator LED will remain on as  
long as the radios are left in the charger.  
INSTALL THE BATTERIES  
Your GMR1058-2CK(4CK) radio uses the NiMH  
battery pack or 4 AAA alkaline batteries (not  
included). If alkaline batteries are used, we  
recommend using high quality alkaline batteries.  
To turn ON channel scanning:  
2) Press either the L or M key to the desired VOX  
sensitivity level. Use level 1 for increased  
sensitivity to voice in normally quiet  
1 Antenna  
15 Receive Indicator  
Press scn key until the scan... icon is displayed.  
The channel number on the display will change as  
the radio rapidly cycles through the channels.  
2 PTT (Push-To-Talk) Button  
3 Power boost Button  
4 Monitor Key  
16 Power Boost Indicator  
17 Call Indicator  
18 Scan Indicator  
USING THE RADIO  
environments, and use a higher level to reduce  
undesired activation in very noisy environments.  
3) Exit the Menu.  
In order to get the most out of your new radio, read  
this reference guide completely before attempting to  
operate the unit.  
5 Call Key  
6 Scan Key  
7 Speaker  
19 Channel Indicator  
20 CTCSS Indicator  
21 Transmit Indicator  
22 Volume Setting Indicator  
23 VOX Indicator  
24 Keypad Lock Indicator  
25 GMRS/FRS Indicator  
26 Charging Contacts  
27 Charging LED  
Choosing a CTCSS Code  
To turn OFF channel scanning:  
To install the Ni-MH battery pack:  
1) Make sure your radio is OFF.  
Each of the channels 1-22 may have any one of  
the codes, OFF or 1-38 selected. Code oF (OFF)  
indicates no CTCSS code selected and your radio  
can receive a signal regardless of the code settings  
of the transmitting radio.  
Press the sel/ key, call key, scan key, PTT  
button or Power boost button.  
8 Channel Key  
9 Headset Jack  
10 Up Key  
11 On/off/select Key  
12 Down Key  
2) Remove the battery compartment door by  
pressing up the tab at the bottom of the  
compartment door allowing the door to be  
removed.  
Turning the Radio On and Adjusting the Volume  
Transmitting a Call Tone  
1) Press and hold the sel/ key to turn the unit  
ON, and increase the speaker volume by  
pressing the L key. To decrease the volume,  
press the M key.  
Your GMR1058-2CK(4CK) radio is equipped with 5  
selectable call tones that will be transmitted when  
the call key is pressed.  
13 Microphone  
14 Battery Level Meter  
3) Install the NiMH battery pack into the battery  
 

Technicolor Thomson MP3 Player PDP2548 User Manual
TIMEX Weather Products Outdoor Timer TM05 User Manual
Toshiba DVD VCR Combo SD V65HTSU User Manual
Toshiba Satellite TV System 1805 User Manual
Trane Microscope Magnifier CNTPRC002 User Manual
TRENDnet Computer Drive TEW 649UB User Manual
TRENDnet Network Hardware TPL307E2K User Manual
Ultra Products Power Supply ULT33165 User Manual
Verilux Clock Radio VA02 User Manual
Vizio Flat Panel Television E221A1 User Manual